Autopilot Standby and Auto buttons blinking

[firstlight38]

(09-22-16 12:49 PM)Chuck - Raymarine - Moderator Wrote:  firstlight38,

The p70/p70R Autopilot Control Heads are designed to support SeaTalk or SeaTalkng communications, but not both simultaneously. Raymarine offers the A22164 Adapter cable to permit the p70/p70R Autopilot Heads and i50/i60 instruments to be interfaced to a SeaTalk bus rather than a SeaTalkng backbone. It is recommended that the p70/p70R be installed as a SeaTalk device (i.e. connect it to the SeaTalk bus) when used autopilot course computers lacking a SeaTalkng communications port.

Thanks again and again.
Seems as though it will duplicate the wiring per my exisitng setup. I have that cable connecting my seatalk1 to STNG E22158 right now (yellow end) so that my a128 can communicate with the instruments.