The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Multifunction Displays v / Interfacing AIS VHF radio to MFD

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Interfacing AIS VHF radio to MFD
02-18-16, 08:57 PM
Post: #1
Lumpy102 Offline
Junior Member
**
 		Posts: 3
Joined: Feb 2016
Reputation: 0
Interfacing AIS VHF radio to MFD
I read the post regarding linking an AIS device to a Raymarine MFD and now I'm confused. So I'll describe my set-up/proposed additions with hopes you can help me. I have an a95 MFD connected to seatalkng backbone. Also connected are ev100 autopilot and I/50 I/60 wind depth speed instruments. We have purchased an Icom IC m-506 VHF radio with AIS reciever. It has a nmea 2000 connector. I've purchased a backbone tee, backbone cable and nmea2000 to STng adapter cable. Will this provide input to radio/AIS and output to mfd? I am unable to complete the setup right now as the boat is laid up for winter, and none of the instruments are installed nor is there power on the boat.
Your expertise is appreciated
Thank you
Brad
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
Interfacing AIS VHF radio to MFD - Lumpy102 - 02-18-16 08:57 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication