Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
SmartPilot X10 NMEA output
10-01-16, 04:27 PM
Post: #1
SmartPilot X10 NMEA output
Does the X10 output speed/wind/depth data on the NMEA 0183 interface?
Speed/wind/depth are connected via ST. STng is not being used.
I am trying to interface to a Garmin 4210 via 0183.
Regards,
Eric
Find all posts by this user
Quote this message in a reply
10-03-16, 10:21 AM
Post: #2
RE: SmartPilot X10 NMEA output
Welcome to the Raymarine Forum Eric,

The SPX Series Autopilots are not designed to function as SeaTalkng / NMEA 2000 to NMEA 0183 data bridging devices with respect to outputting the referenced data items. When seeking to bridge data to/from a SeaTalkng / NMEA 2000 backbone to NMEA 0183, it is recommended that a compatible MFD featuring a NMEA 0183 interfaced or a SeaTalkng / NMEA 2000 data bridge (ex. Actisense NGW-1-STNG, etc.) be used.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)