Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
A57D screen movement
02-19-16, 02:23 PM
Post: #1
Brick A57D screen movement
I can not get my screen to follow my ship icon . If the icon sails off the sreen the map does not follow it
Find all posts by this user
Quote this message in a reply
02-19-16, 02:37 PM (This post was last modified: 02-19-16 02:47 PM by Chuck - Raymarine - Moderator.)
Post: #2
RE: A57D screen movement
Welcome to the Raymarine Forum Check6,

It is recommended that you verify that you have configured your MFD's Chart application page's/pane's Motion Mode setting (CHART MODE & ORIENTATION->MOTION MODE) to RM (Relative Motion) and Chart Synch (CHART MODE & ORIENTATION->CHART SYNC) setting to OFF. Additionally, operators will typically configure the MFD's Chart application page's/pane's Chart Orientation to N-UP (North Up) when operating offshore and H-Up (Head Up) when operating near shore or inshore. The most commonly used Chart application page/pane configuration settings are Head Up Chart Orientation with a 2/3 Offset to maximize amount of chart displayed ahead of the boat's position.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)