The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Autopilots v / ST 4000+ auto helm erratic...

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
ST 4000+ auto helm erratic...
02-19-16, 10:20 PM
Post: #1
Doug/Karen Offline
Junior Member
**
 		Posts: 1
Joined: Feb 2016
Reputation: 0
ST 4000+ auto helm erratic...
The auto helm on our boat was installed in 2004, two years before we acquired the boat. We were advised by the PO that he had never found the auto helm to be consistantly reliable. It would have its good and bad days. Unfortunately, our experience has been the same. We have gone through the calibrations exercises, confirmed the location of the fluxgate compass to not be compromised by surrounding metal masses, etc. Reading this forum, I see that there are updates available. Would you suggest getting the most current technology on board as the next best step? If so, what are the product details i will be asking for?
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
ST 4000+ auto helm erratic... - Doug/Karen - 02-19-16 10:20 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication