Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Connecting PC to E120
10-22-16, 02:51 PM
Post: #1
Connecting PC to E120
Hello all,

I am the new owner of an E120 system circa, 2008-9. I am trying to enable my licensed version of RNS 6.1 to work on my PC via ethernet cable connected to port 5 of the SeaTalk HS5 Network Switch.

I get a message that tells me I need to Reconfigure my DHCP Server to assign IP addresses and a subnet mask which I would do if I knew where/how to find those values in my Lenova Think Pad Laptop running Windows 7.

Anybody have any idea about how and/or if this is the right next step?

Thanks kindly!

Rob
Find all posts by this user
Quote this message in a reply
10-24-16, 11:25 AM
Post: #2
RE: Connecting PC to E120
Ron,

I'm glad that you were successful in locating the license key / serial number. RayTech RNS 6.1 may be used with a PC running the Windows XP, Windows Vista, Windows 7, or Windows 8 operating system. This license key / serial number will allow the PC running the RayTech RNS 6.1 software to be networked Raymarine Ethernet (SeaTalkhs) network. Please click here to view a FAQ addressing how establish network communications between a PC running RayTech RNS 6.1 and an E-Series Classic MFD.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)