Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Crossover connectpor for Quantum and eS127
10-29-16, 01:25 PM
Post: #1
Crossover connectpor for Quantum and eS127
I am considering connecting the Quantum radar to the eS127 MFD without the use of an HS5 for now. I would add the HS5 later when we add additional needed equipment.

I am planning on connecting the A80006 20M raynet cable from the eS127 to the mast. I believe I would then need a crossover connector to connect to the A80006 to the A80229 power and data cable coming from the Quantum.

Can you please confirm this will work and provide me with the part number for the crossover connector to be used.
Find all posts by this user
Quote this message in a reply
10-31-16, 09:43 AM
Post: #2
RE: Crossover connectpor for Quantum and eS127
Welcome to the Raymarine Forum Lazybones,

A crossover coupler would not be used for the stated purpose. As both Digital Radar Cables and the A80006 20M RayNet (F) to RayNet (F) Cable both feature RayNet (F) plugs, an A80162 RayNet (M) to RayNet (M) Adapter would be used to join the two cables which you have listed.
Visit this user's website Find all posts by this user
Quote this message in a reply
10-31-16, 10:10 AM
Post: #3
RE: Crossover connectpor for Quantum and eS127
Thank you. Sorry for the duplicate thread.
Find all posts by this user
Quote this message in a reply
10-31-16, 10:20 AM
Post: #4
RE: Crossover connectpor for Quantum and eS127
You're welcome.
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)