Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
eS127 to wifi networks
11-19-16, 10:48 AM
Post: #1
eS127 to wifi networks
We are looking for a wifi router, extender and broadband system. The WiriePro says it does not work with the Raymarine MFD. Can you rcommend other systems that do work with the MFD or advise if there are any plans to make the WiriePro and Raymarine MFD compatible?
Find all posts by this user
Quote this message in a reply
11-21-16, 10:10 AM (This post was last modified: 11-21-16 10:11 AM by Chuck - Raymarine - Moderator.)
Post: #2
RE: eS127 to wifi networks
Welcome to the Raymarine Forum Lazybones,

Raymarine has not recommended any specific manufacturer's Wi-Fi routers, Wi-Fi extenders, or broadband systems. When seeking such products, it is recommended that the manufacturer of any such product ensure that the product is not restricted to Class A IPV4 Private Network address spaces (10.0.0.0 - 10.255.255.255), as such devices will conflict with the IP addressing utilized by Raymarine products.
Visit this user's website Find all posts by this user
Quote this message in a reply
11-21-16, 11:24 AM
Post: #3
RE: eS127 to wifi networks
Are there any plans to modify the addressing scheme to work with the Wirie products?

The Wirie gave me this response.

"They assumed they could use all 10.X.X.X addresses, which supports 16777214 devices. No boat or Raymarine install will ever have even close to that many devices. Their software should have been written to support a smaller set of devices (10.1.X.X for example which still supports 65534 devices) in order to avoid conflicts. It is not "correct" to reserve that many devices and preclude any other device on the network from using them."
Find all posts by this user
Quote this message in a reply
11-21-16, 11:40 AM
Post: #4
RE: eS127 to wifi networks
Lazybones,

Please click here to view the thread in which I had previously addressed this subject.
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)