The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error

Post Reply 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
E120 random reboot
02-23-16, 10:07 PM
Post: #1
E120 random reboot
My E120 reboots by itself often, anywhere from 1 to 30 minutes between reboots. The system is an E120 connected to an original SeaTalk network and to a Network Switch via a SeaTalkHS. The network switch is in turn connected to an Open array radar and a CP300 Digital Sonar Module.

In an effort to troubleshoot the problem I removed various modules and found that the system is fine until the CP300 is connected to the Network Switch. The CP300 was installed in December 2015 and was checked out for just a few minutes and then the boat was not used until a few days ago when the problem was discovered. The CP300 reports the depth correctly.

My E120 is S/N E02013-015078, the firmware is version v5.69 and the Boot version is v1.03.
The Network Switch has a label on it,“E55058-0260309" and the CP300 has no label.

Can you suggest my next step for troubleshooting?
Find all posts by this user
Quote this message in a reply
Post Reply 

Messages In This Thread
E120 random reboot - Lew Springer - 02-23-16 10:07 PM
RE: E120 random reboot - Lew Springer - 02-24-16, 01:59 PM
RE: E120 random reboot - Lew Springer - 02-25-16, 06:08 AM
RE: E120 random reboot - Lew Springer - 02-28-16, 04:57 PM
RE: E120 random reboot - Lew Springer - 03-07-16, 03:46 AM
RE: E120 random reboot - Lew Springer - 03-16-16, 09:43 PM

Forum Jump:

User(s) browsing this thread: 1 Guest(s)