Raymarine forum / Raymarine Forums / Instruments v / Seatalk2 to STng

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Seatalk2 to STng
06-27-17, 08:38 AM (This post was last modified: 06-27-17 08:45 AM by Chuck - Raymarine - Moderator.)
Post: #6
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: Seatalk2 to STng
Kevin,

Per our discussion, it is recommended that the software level of the S3G be checked and that it be updated if it is found to not be current ... this may be the source of the reported COG issue.

Other than that it would appear that the symptoms reported are simply features of interfacing the latest generation of products to the ST290 system. While some separating the systems and then controlling the flow of data between the systems using some programmable NMEA 0183 multiplexers may address the arrival alarm issue, the time/money may be better spent in evaluating whether the ST290 system may be replaced with current Raymarine product designs.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
Seatalk2 to STng - Kevin - 12-12-16, 03:03 PM
RE: Seatalk2 to STng - Kevin - 06-26-17, 01:19 PM
RE: Seatalk2 to STng - Kevin - 06-27-17, 07:20 AM
RE: Seatalk2 to STng - Chuck - Raymarine - Moderator - 06-27-17 08:38 AM
RE: Seatalk2 to STng - Kevin - 06-28-17, 06:32 AM
RE: Seatalk2 to STng - tgsail1 - 12-01-17, 10:22 AM
[CA] RE: Seatalk2 to STng - tgsail1 - 12-04-17, 10:58 PM
RE: Seatalk2 to STng - tgsail1 - 12-08-17, 12:18 PM
RE: Seatalk2 to STng - tgsail1 - 12-23-17, 10:28 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication