Thread Closed 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Viewing a Raymarine IP Camera's web page
01-03-17, 03:58 PM (This post was last modified: 09-19-17 01:54 PM by Chuck - Raymarine - Moderator.)
Post: #1
Viewing a Raymarine IP Camera's web page
Viewing a Raymarine IP Camera's web page

In order to access the web page of a CAM210IP, CAM220IP, or CAM220IP, the camera will need to be powered and then plugged into the Ethernet socket of a PC running the Windows 7 or later operating system. After doing so, the IP address of the camera will need to determined using the IPScan Utility found within the documentation CD packaged with the camera. The IPScan Utility may also be downloaded here. After determining the IP address of the camera, you will then open Internet Explorer (do not use other Internet browsers) on the PC, copy the camera's IP address into the address field of Internet Explorer, and then press the keyboard's ENTER button. Doing so will cause the Raymarine IP camera web page's login screen to be displayed. The default login ID and password for the above listed Raymarine IP cameras is "admin" and "1234" respectively. The attached PDF file illustrates the procedure used on our Windows 10 computer.

Window's 10 hint: the File Explorer dialog which Windows 7/8 customers may be accustomed to may be accessed by typing "File Explorer" into the "Search the web and Windows" field (see the red circled field within the image below).

[Image: attachment.php?aid=702]


RAYFAQ#


Attached File(s) Thumbnail(s)
   

.pdf  Accessing_Camera_Web_Page.pdf (Size: 1.24 MB / Downloads: 2658)
Find all posts by this user
Thread Closed 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)