Post Reply 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
E120/SeaRay Navigator Upgrade ?
02-13-17, 01:43 PM
Post: #15
RE: E120/SeaRay Navigator Upgrade ?
When connecting my CAM220 to the HS5 through the PoE Injector, can/should I use this connectivity method:

1. HS5 SeaTalkhs Network Switch (A80007) - Under the helm
2. RayNet to RJ45 Port Male Cable, 1M (A62360) - From the HS5 to the PoE injector
3. PoE Injector (R32141) - Under the helm where my HS5 and fuse block is located
4. G-Series Highspeed Patch Cable, 10M (E06056) - From the injector routed up/back to the camera's location
5. Supplied Waterproof RJ45 ethernet coupler (R32142) - To connect the camera's ethernet cable to the patch cable

I wasn't sure between these cables, the injector, and/or the coupler if anything was acting as a "cross-over" that might prevent connectivity. The CAM220 installation documentation doesn't describe this exact example. Thanks.
Find all posts by this user
Quote this message in a reply
Post Reply 

Messages In This Thread
RE: E120/SeaRay Navigator Upgrade ? - rvaupel23 - 02-13-17 01:43 PM

Forum Jump:

User(s) browsing this thread: 1 Guest(s)