Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
connect a e127 MFD with e80 MFD
01-31-17, 03:51 PM
Post: #1
connect a e127 MFD with e80 MFD
I am updating my electronics, the boat came with 2 e80 MFD's. The 2 MFD's were connected with a RS45 wire and one of the E80s was a slave to the other. I replace the main MFD with an E127, can I connect the two devices to the same network and have the E80 work as a slave again?

A little more info - I connected a new I50 Tridata using a NMEA back bone. I connected the ST6001 using a NMEA to Seatalk conversion kit. The GPS 125 is connected to the Seatalk network.
Find all posts by this user
Quote this message in a reply
01-31-17, 04:41 PM
Post: #2
RE: connect a e127 MFD with e80 MFD
Welcome to the Raymarine Forum lduchscher,

Q1. If I replace the main MFD with an E127, can I connect the two devices to the same network and have the E80 work as a slave again?
A1. No. Please click here to view a FAQ addressing this subject. As indicated within the FAQ, should true dual station capability be required, then the E80 MFD would need to be replaced as well.
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)