Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Help with DS400X
02-13-17, 01:36 PM (This post was last modified: 02-13-17 01:42 PM by Chuck - Raymarine - Moderator.)
Post: #1
Help with DS400X
Just bought a boat that has a DS400 and put the boat in the water and turned the unit on and all i had was a blue screen with water temp. nothing on depth or speed. Please Help
Find all posts by this user
Quote this message in a reply
02-13-17, 01:54 PM (This post was last modified: 02-13-17 01:58 PM by Chuck - Raymarine - Moderator.)
Post: #2
RE: Help with DS400X
Welcome to the Raymarine Forum ONE2HUNT,

Please click here to view a FAQ addressing this subject. Should the fault isolation indicate a transducer failure, then the problem may be resolved by replacing the transducer with another compatible fishfinder transducer. However, should the fault isolation indicate a failure within the display, then the fishfinder would need to be replaced as Raymarine's Product Repair Center can no longer service DS400X/500X/600X Fishfinders. This class of fishfinder is typically replaced with a Dragonfly 4 Fishfinder or an a67 Multifunction Display.

Regarding Speed (through water) the fishfinder must be interfaced to a fishfinder transducer having a speed through water paddlewheel. Please respond with the model of transducer which has been interfaced to the DS400X.
Visit this user's website Find all posts by this user
Quote this message in a reply
02-13-17, 09:08 PM (This post was last modified: 02-14-17 10:05 AM by Chuck - Raymarine - Moderator.)
Post: #3
RE: Help with DS400X
Thank You
Find all posts by this user
Quote this message in a reply
02-14-17, 10:06 AM
Post: #4
RE: Help with DS400X
You're welcome.
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)