Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
DSM300 Software Upgrade
02-15-17, 03:06 PM
Post: #1
DSM300 Software Upgrade
I'm trying to update the software on my DSM300 from v4.10 to 4.20 through a e125 MFD and when I insert the MicroSD card and reboot the MFD (DSM300 remains powered when I do this so it's not simultaneously starting up) the installation hangs. Screenshot attached. The DSM300 works normally, but I would like to upgrade the software.
Find all posts by this user
Quote this message in a reply
02-15-17, 03:17 PM
Post: #2
RE: DSM300 Software Upgrade
Welcome to the Raymarine Forum Bradley,

The software updates introduced following v4.10 were primarily introduced to improve communications between Raymarine MFDs and a DSM30 or DSM300. Should the system not be reported "DSM Connection Lost" or "No DSM" within the Fishfinder application then it would not be recommended that the DSM be updated with any of the software updates which followed v4.10.
Find all posts by this user
Quote this message in a reply
02-15-17, 04:07 PM
Post: #3
RE: DSM300 Software Upgrade
Ok, thanks. I'll leave well enough alone then.
Find all posts by this user
Quote this message in a reply
02-15-17, 04:33 PM
Post: #4
RE: DSM300 Software Upgrade
You're welcome.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)