Thread Closed 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Can Axiom MFDs be daisy-chained via Ethernet to other compatible devices?
02-17-17, 09:54 AM (This post was last modified: 02-17-17 10:14 AM by Chuck - Raymarine - Moderator.)
Post: #1
Can Axiom MFDs be daisy-chained via Ethernet to other compatible devices?
Can Axiom MFDs be daisy-chained via Ethernet to other compatible devices?

As all Axiom MFDs feature a single Ethernet NETWORK port (accepts RayNet plug), the Ethernet NETWORK port of the Axiom MFDs may be interfaced to one other compatible device having an Ethernet communications interface (ex. other Axiom MFDs, Quantum/Digital/HD Digital Radomes, HD/SuperHD Digital Open Array Pedestals, fishfinder sonar modules, SiriusXM Weather/Radio Receiver,IP cameras, thermal cameras, etc.). Should an Axiom MFD need to be interfaced to more than one compatible device having an Ethernet communications interface, then it will be necessary to install a HS5 RayNet Network Switch(es) (or retired SR6 or SeaTalkHS Network Switch) and then interface each compatible device having an Ethernet communications interface to the switch(es).

RAYFAQ#
Find all posts by this user
Thread Closed 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)