Raymarine forum / Raymarine Forums / Marine Weather / Satellite Radio v / [CA] [CA11] Barometer Choice and Interface

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Barometer Choice and Interface
02-22-17, 11:44 AM (This post was last modified: 05-14-19 02:31 PM by Chuck - Raymarine - Moderator.)
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] Barometer Choice and Interface
Welcome to the Raymarine Forum ColtsNeckNJ,

The a/c/e/eS/gS-Series MFDs, Axiom MFDs, and i70/i70S MFIDs are designed to support displaying atmospheric pressure from NMEA 2000 data sources. The c/e/eS/gS-Series MFDs, a9x MFDs, and a12X MFDs are additionally designed to support displaying atmospheric pressure from NMEA 0183 data sources. While Raymarine does not offer any products which are designed to sense atmospheric pressure, there are several third party manufacturers (ex. Airmar, Maretron, Yacht Designs, NKE Marine Electronics, etc.) offering such sensors. One of the most commonly installed products used to provide weather data to Raymarine systems are Airmar's Weather Stations.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] Barometer Choice and Interface - Chuck - Raymarine - Moderator - 02-22-17 11:44 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication