Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
E120 - AXIOM Upgrade
02-25-17, 07:36 PM
Post: #1
E120 - AXIOM Upgrade
I am looking to upgrade an existing E120 system with an Axiom 12" MFD.

Q1) Can you please confirm that the new AXIOM displays will be backwards compatible with the DSM300 module using the SeatalkHS/RayNet adapter. If it's not I would likely purchase the eS128 which I see from online is compatible.

Q2) Can the eS128 be used with the DSM300/Transducer & also another transducer(CHIRP) connected to the internal sounder module. I wanted to double check that either can be selected and used independently.

It would however be nice to use the AXIOM instead for future expansion.
Thanks for your help.
Find all posts by this user
Quote this message in a reply
02-27-17, 02:45 PM (This post was last modified: 02-28-17 11:01 AM by Chuck - Raymarine - Moderator.)
Post: #2
RE: E120 - AXIOM Upgrade
Welcome to the Raymarine Forum PetrelMarine,

Q1) Can you please confirm that the new AXIOM displays will be backwards compatible with the DSM300 module using the SeatalkHS/RayNet adapter. If it's not I would likely purchase the eS128 which I see from online is compatible.
A1) Please click here to view a FAQ addressing this subject.

Q2) Can the eS128 be used with the DSM300/Transducer & also another transducer(CHIRP) connected to the internal sounder module. I wanted to double check that either can be selected and used independently.
A2) The TRANSDUCER socket of the ax8 MFDs and eSx8 MFDs may be interfaced to a compatible CHIRP (conical) / DownVision Transducer. These MFDs may simultaneously be interfaced to a CP370, CP300 (retired), DSM30, and DSM300 50/200 kHz Digital Sounder Modules w/compatible 50/200 kHz Transducer to simultaneously support displaying CHIRP Conical, DownVision, 50 kHz, and 200 kHz sonar imaging (page divided into four panes, each configure to display one of above listed sonar sources (i.e. CHIRP Conical, DownVision, 50 kHz, and 200 kHz sonar).
Find all posts by this user
Quote this message in a reply
03-01-17, 05:16 PM (This post was last modified: 03-01-17 05:18 PM by Chuck - Raymarine - Moderator.)
Post: #3
RE: E120 - AXIOM Upgrade
Thank you sir.
Find all posts by this user
Quote this message in a reply
03-01-17, 05:19 PM
Post: #4
RE: E120 - AXIOM Upgrade
You're welcome.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 2 Guest(s)