Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Will Airmar M260 work with new Axiom
02-27-17, 08:07 PM
Post: #1
Will Airmar M260 work with new Axiom
I would like to replace my old E80 with the 12 inch Axiom can I use my existing Airmar M260 in hull transducer with the new unit. It is currently connected through
a DSM 300?
If so can it connect directly or does it still need to go through the DSM?
Find all posts by this user
Quote this message in a reply
02-28-17, 12:27 PM (This post was last modified: 03-01-17 09:16 AM by Chuck - Raymarine - Moderator.)
Post: #2
RE: Will Airmar M260 work with new Axiom
Welcome to the Raymarine Forum mlove,

Q1. I would like to replace my old E80 with the 12 inch Axiom can I use my existing Airmar M260 in hull transducer with the new unit. It is currently connected through
a DSM 300. If so can it connect directly or does it still need to go through the DSM?
A1. Please click here to view a FAQ addressing which fishfinder modules the AXIOM MFDs be compatible with. Please click here to view a FAQ addressing which transducers may be mated directly to the Axiom RV MFDs?
.
Visit this user's website Find all posts by this user
Quote this message in a reply
02-28-17, 08:25 PM
Post: #3
RE: Will Airmar M260 work with new Axiom
Thanks
got it
Find all posts by this user
Quote this message in a reply
03-01-17, 09:18 AM
Post: #4
RE: Will Airmar M260 work with new Axiom
You're welcome.
Visit this user's website Find all posts by this user
Quote this message in a reply
03-02-17, 07:22 AM (This post was last modified: 03-02-17 08:42 AM by Chuck - Raymarine - Moderator.)
Post: #5
RE: Will Airmar M260 work with new Axiom
What is the benefit of connecting both the RealVision 3Dâ„¢ transducer and an additionally interfaced CP370/CP300/DSM30/DSM300 compatible transducer to a Axiom RV MFD?
Find all posts by this user
Quote this message in a reply
03-02-17, 08:54 AM
Post: #6
RE: Will Airmar M260 work with new Axiom
Stan,

When not interfaced to a RealVision 3Dâ„¢ transducer and interfaced only to a CP370/CP300/DSM30/DSM300 compatible transducer or to a CP370/CP300/DSM30/DSM300 Sounder Module with a compatible an, an AXIOM DV and AXIOM RV MFD will only support 50/200kHz conical fishfinder imagery. However, should an AXIOM RV MFD is additionally interfaced to a RealVision 3Dâ„¢ transducer, then the AXIOM RV MFD will additionally support RealVision 3Dâ„¢, SideVision, DownVision, and CHIRP (conical) fishfinder sounder imagery/features. Similary, should an AXIOM DV MFD is additionally interfaced to a compatible CHIRP/DownVision transducer, then the AXIOM DV MFD will additionally support DownVision and CHIRP (conical) fishfinder sounder imagery/features.
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)