Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Radar Overlay
03-01-17, 03:43 PM
Post: #1
Radar Overlay
My e125 and HD radome do not overlay radar on the main chart screen.

But the radar overlays on split screen pages, such as CHART/RADAR, CHART/FISHFINDER, CHART/ANYTHING ELSE.

It just does not appear on the main chart.

All charts on the same distance setting.

What am I doing wrong?
Find all posts by this user
Quote this message in a reply
03-01-17, 04:17 PM (This post was last modified: 03-01-17 04:19 PM by Chuck - Raymarine - Moderator.)
Post: #2
RE: Radar Overlay
Welcome to the Raymarine Forum tjdj0214,

Please click here to view a FAQ addressing the requirements for radar overlay. As indicated within the FAQ, should the vessel not be interfaced to a source of heading data, then the MFD (operating with the latest available Raymarine product software update (v17.46 at the time of this response) would need to be underway and making way. It is recommended that you verify that your MFD has been updated with the latest available Raymarine product software update. If so, and as the chart pages/panes are designed to be individually configurable with respect to the objects overlaid, it is recommended that you verify that you have configured the Radar Overlay feature ON and that it's opacity has been configured to a level permitting it t be viewed within the Chart application page/pane in which you desire to view it. Finally, should the Chart Synch feature not be configured to OFF within the affected Chart application page, then it is recommended that it be configured to OFF or to RADAR.
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)