Raymarine forum / Raymarine Forums / Instruments v / ST60+ Tridata depth not working correctly.

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
ST60+ Tridata depth not working correctly.
03-02-17, 10:16 AM
Post: #1
Clarence Offline
Junior Member
**
 		Posts: 1
Joined: Apr 2016
Reputation: 0
ST60+ Tridata depth not working correctly.
My depth gauge has started to just show 3 dashes on start up, but after 30 or 40 minutes will display the depth. The connection seem to be Ok. I am currently in mexico till May 2017.
Find all posts by this user
Quote this message in a reply
03-03-17, 03:24 PM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: ST60+ Tridata depth not working correctly.
Welcome to the Raymarine Forum Clarence,

Please click here to view a FAQ addressing this subject. Should the problem be isolated to the ST60+ Tridata instrument, then the instrument would need to be replaced, as Raymarine's Product Repair Center can no longer service ST60/ST60+ Instruments. An i50 Tridata Instrument would typically be recommended should a replacement instrument be necessary.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication