Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
VOLTAGE READING IN THE E120
03-06-17, 04:49 PM
Post: #2
RE: VOLTAGE READING IN THE E120
Welcome to the Raymarine Forum ynot,

Unless interfaced to a NMEA 2000 battery voltage monitor, the MFD would be incapable of populating the Databar or Data application with Battery Voltage. However, a reasonably accurate reporting of battery voltage may be obtained within the MFD's diagnostics (MENU->SYSTEM DIAGNOSTICS->INTERNAL INTERFACES->CCFL->POWER MONITOR).
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
VOLTAGE READING IN THE E120 - ynot - 03-03-17, 11:00 PM
RE: VOLTAGE READING IN THE E120 - Chuck - Raymarine - Moderator - 03-06-17 04:49 PM
RE: VOLTAGE READING IN THE E120 - ynot - 03-06-17, 11:20 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)