Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Ais 950 / C90-Wide
03-06-17, 02:25 PM (This post was last modified: 03-06-17 06:11 PM by Denis.)
Post: #1
Ais 950 / C90-Wide
Do i have all features ( Silent mode ETC.. ) if i connect AIS 650 transceiver to
C90 Wide using STnG port ?
Find all posts by this user
Quote this message in a reply
03-06-17, 02:57 PM
Post: #2
RE: Ais 950 / C90-Wide
Welcome to the Raymarine Forum Denis,

The AIS950 does not feature a SeaTalkng communications interface and is not designed to be commanded into Silent Mode via an external display. Unlike Class B AIS transceivers, Class A AIS transceivers do not support Silent Mode.
Visit this user's website Find all posts by this user
Quote this message in a reply
03-06-17, 06:10 PM (This post was last modified: 03-07-17 09:27 AM by Chuck - Raymarine - Moderator.)
Post: #3
RE: Ais 950 / C90-Wide
Sorry my mistake... my question was about AIS-650...
Find all posts by this user
Quote this message in a reply
03-07-17, 09:30 AM
Post: #4
RE: Ais 950 / C90-Wide
Denis,

Whether interfaced via NMEA 0183 or SeaTalkng communications protocol, an AIS650 may be commanded into and out of Silent Mode via a C-Series Widescreen MFD. Before interfacing these products to one another, it is recommended that each be updated with the latest available respective Raymarine product software update.
Visit this user's website Find all posts by this user
Quote this message in a reply
03-13-17, 03:00 PM (This post was last modified: 03-15-17 07:57 AM by Dave - Raymarine - Moderator.)
Post: #5
RE: Ais 950 / C90-Wide
Thanks Chuck...
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)