Post Reply 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
20150209 Patch will not open
03-09-16, 03:44 PM
Post: #8
RE: 20150209 Patch will not open

Unlike the a/c/e/eS/gS-Series MFD software updates which may be initiated by inserting the microSD memory card containing the software update files into the MFD's reader after the MFD has completed booting, the microSD memory card containing the software update files must be inserted into the MFD's reader prior to powering up the MFD. Per the instructions posted on the SR150 software update web page:

Updating the SR150 using a, c, e, eS or gS Series MFD's

1) Please make sure RayNet (SeaTalkhs) is connected to both the SR150 and the MASTER Multifunction Display (MFD), and that all are powered before starting the update procedure.
2) With the MFD powered down, place the mSD card with the SR150 software into the MFD and turn it on. – The MFD will search for the remote SR150 and proceed to upgrade the software.
3) MFD will show update % progress and eventually “Upgrade Complete” for the product/s.
4) Remove Card and Power cycle the whole system.
------It is very important that the SR150 is power cycled, so that the installed software is fully loaded into the product.

Once all the devices in the system are updated, configure the MFD's Weather Receiver Type (HOME->SET-UP->SYSTEM SETTINGS->EXTERNAL DEVICES->WEATHER SET-UP->RECEIVER TYPE) to SR150 and that the SR150's software is correct by going to the Select Devices list (HOME->SET-UP->MAINTENANCE->DIAGNOSTICS->SELECT DEVICE).
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 

Messages In This Thread
20150209 Patch will not open - Markinsc - 03-02-16, 11:07 AM
RE: 20150209 Patch will not open - Chuck - Raymarine - Moderator - 03-09-16 03:44 PM

Forum Jump:

User(s) browsing this thread: 1 Guest(s)