Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
radar overlay
06-01-16, 09:47 AM
Post: #6
RE: radar overlay
gatotom,

In 2013, E-Series Widescreen MFDs (E90W, E120W, E140W) and the new e-Series MFDs were both available. Should you have an E-Series Widescreen installed onboard the vessel, then installation of an EV-1 Sensor Core would indeed permit the Chart application's radar overlay feature to be utilized. However, should the vessel be equipped with one of the new e-Series MFDs or an eS-Series MFD, then there are two ways in which the Chart applications of these MFDs will support radar overlay:
- if interfaced to a heading data source (ex. EV-1 Sensor Core, etc.). When interfaced to a source of heading data, the Chart application's radar overlay feature may be swithed ON at any time that the MFD has a GPS position FIX.
- if operating with the latest a/c/e/eS/gS-Series MFD software, underway, and making way, then the MFD will support use of COG should the MFD not be interfaced to a source of heading data. The Chart application's radar overlay feature cannot be accessed/configured ON when the vessel is stationary (i.e. a stationary vessel has not COG).
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
radar overlay - gatotom - 03-02-16, 04:37 PM
RE: radar overlay - gatotom - 03-28-16, 11:14 AM
RE: radar overlay - gatotom - 05-31-16, 03:51 PM
RE: radar overlay - Chuck - Raymarine - Moderator - 06-01-16 09:47 AM
RE: radar overlay - rmpoole1 - 09-27-16, 11:56 AM
RE: radar overlay - rmpoole1 - 09-27-16, 05:18 PM
RE: radar overlay - rmpoole1 - 09-29-16, 09:16 AM
RE: radar overlay - rmpoole1 - 09-29-16, 10:47 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)