Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Turn off Fishfinder
03-16-17, 09:00 AM
Post: #1
Turn off Fishfinder
My boat is in winter storage. I want to operate my C97 MFD without having the Fishfinder send out a signal to the concrete below. Is there a way to disable the Fishfinder temporarily?
Find all posts by this user
Quote this message in a reply
03-16-17, 11:56 AM (This post was last modified: 03-16-17 11:58 AM by Dave - Raymarine - Moderator.)
Post: #2
RE: Turn off Fishfinder
Hello Baysailor,

If you are using the MFD's built in sonar module, just unplug the transducer cable from the transducer port on the back. Make sure the display is OFF before you do this. If you are using an external sonar module, first identify the unit and then unplug the POWER cable from it. **Never unplug/plug a transducer from/into a powered on sonar module. If your display is your sonar module, make sure the display is off first. Unplugging a transducer from a powered ON sonar module could potentially damage both the transducer and sonar module.**

- Dave
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)