Interfaceing EV 200 to older Raymarine Displays/ GPS
|
04-03-17, 11:11 AM
(This post was last modified: 04-03-17 12:28 PM by Chuck - Raymarine - Moderator.)
Post: #5
|
|||
|
|||
RE: Interfaceing EV 200 to older Raymarine Displays/ GPS
I figured as much. I have pulled both Sea Talk plugs from the back of the ST60001+ head. That in turn should remove the old course computer from the network, correct?
Also, I always see you repeatedly mention that the Sea Talkng network "should" be powered from a separate 12 volt source and not via the ACU. In FLOB's previous reply to me he suggests powering the converter from the ACU. That is how I have it presently and everything appears to be working fine. As I mentioned previously the old power source to the Sea Talk side of the system has been removed and now both systems are powered with the 12 volt originating from the ACU box. Why would Raymarine have the option with the power switch back there if we are not supposed to use it? Again, thanks for all the help! -Walt- |
|||
« Next Oldest | Next Newest »
|
User(s) browsing this thread: 1 Guest(s)