Threaded Mode | Linear Mode

***Chuck - Raymarine - Moderator*** · 03-22-17, 01:49 PM

Welcome to the Raymarine Forum Solo_Cam21,

Q1) If I added a second screen, which Axiom 7 model would I need? I was confused on the ability to have say sonar on one and 3D on the other.
A1) Like a/c/e/eS/gS-Series MFDs, AXIOM MFDs are designed to share all interfaced resources within other compatible MFDs (i.e. another AXIOM MFD). Accordingly, an AXIOM RV MFD (has transducer socket for and processor circuitry for a RealVision 3D transducer) may be interfaced to any model of AXIOM MFD to support displaying RealVision 3D sonar on any of the AXIOM MFDs.

Q2) In relation to the question above, can two screens share the same Transducer?
A2) Yes.

Q3) If the two systems are linked, would just a RayNet cable between the two complete this?
A3) Yes.

Q4) Currently I have a Dragonfly already installed. If I was to keep this on the boat as a backup system can I mount the new 3D RV Transducer next to the existing Dragonfly transducer? I wasn't sure about interference between the two. (Transom Mounts)
A4) As long the transducer located alongside the RealVision 3D transducer does not expose the RealVision 3D transducer to an aerated flow of water, little or no interference would be expected.

Q5) Can the Axiom wifi settings allow an iPad to connect to do sonar or mapping on side?
A5) Coincident or shortly after the release of the AXIOM MFDs, Raymarine will release updated mobile apps to support connecting to the MFDs via Wi-Fi to permit the MFD to be remotely controlled and for the MFD's screen to be repeated on the mobile device.

Q6) As for the flush mounting of the Axiom, does all the equipment for this come with the unit? Will the flush mount sun cover come with it?
A6) The AXIOM MFDs are packaged with a sun cover and Trunion brackets to support bracket mounting the MFD. Front Mount Kits are available to support mounting the AXIOM MFDs within the helm surface. The sun cover packaged with the AXIOM MFD may also be used when the MFD mounted within the helm surface using the corresponding Front Mount Kit.