CAM 200IP cabling

Thread Rating:

0 Vote(s) - 0 Average
1
2
3
4
5

Threaded Mode | Linear Mode

CAM 200IP cabling

06-23-16, 09:19 AM

Post: #7

george123 Offline

Member

Posts: 81
Joined: Feb 2016
Reputation: 0

RE: CAM 200IP cabling

The material that is used in the installation: E70262 Cam200 IP, E06056 patch cable 10m, R32142 coupler, and R32141 POE. Patch cable plugged into the POE side of the injector and short Raynet cable plugged into the DATAIN side of the POE. I also benched tested the POE by connecting just power and the LED was RED. I next connected the POE to a laptop ethernet cable between LAPtop and the datain on the POE.

« Next Oldest | Next Newest »

Messages In This Thread

CAM 200IP cabling - Pdog1989 - 03-03-16, 01:39 PM

RE: CAM 200IP cabling - Chuck - Raymarine - Moderator - 03-03-16, 01:55 PM

RE: CAM 200IP cabling - Pdog1989 - 03-03-16, 01:58 PM

RE: CAM 200IP cabling - Chuck - Raymarine - Moderator - 03-03-16, 02:41 PM

RE: CAM 200IP cabling - george123 - 06-22-16, 06:24 PM

RE: CAM 200IP cabling - Chuck - Raymarine - Moderator - 06-23-16, 07:47 AM

RE: CAM 200IP cabling - george123 - 06-23-16 09:19 AM

RE: CAM 200IP cabling - george123 - 06-23-16, 02:12 PM

RE: CAM 200IP cabling - Chuck - Raymarine - Moderator - 06-23-16, 02:13 PM

RE: CAM 200IP cabling - george123 - 06-23-16, 04:04 PM

RE: CAM 200IP cabling - Chuck - Raymarine - Moderator - 06-23-16, 04:12 PM

User(s) browsing this thread: 2 Guest(s)