CAM 200IP cabling

Thread Rating:

0 Vote(s) - 0 Average
1
2
3
4
5

Threaded Mode | Linear Mode

CAM 200IP cabling

03-03-16, 02:41 PM (This post was last modified: 06-23-16 07:45 AM by Chuck - Raymarine - Moderator.)

Post: #4

Chuck - Raymarine - Moderator Offline

Administrator

Posts: 14,319
Joined: Oct 2014
Reputation: 43

RE: CAM 200IP cabling

Pdog1989,

The Ethernet switch of the SR6 does not feature POE ports. As such, it will be necessary to either connect it to a 12V power circuit or install a POE Injector to power the CAM200IP.

« Next Oldest | Next Newest »

Messages In This Thread

CAM 200IP cabling - Pdog1989 - 03-03-16, 01:39 PM

RE: CAM 200IP cabling - Chuck - Raymarine - Moderator - 03-03-16, 01:55 PM

RE: CAM 200IP cabling - Pdog1989 - 03-03-16, 01:58 PM

RE: CAM 200IP cabling - Chuck - Raymarine - Moderator - 03-03-16 02:41 PM

RE: CAM 200IP cabling - george123 - 06-22-16, 06:24 PM

RE: CAM 200IP cabling - Chuck - Raymarine - Moderator - 06-23-16, 07:47 AM

RE: CAM 200IP cabling - george123 - 06-23-16, 09:19 AM

RE: CAM 200IP cabling - george123 - 06-23-16, 02:12 PM

RE: CAM 200IP cabling - Chuck - Raymarine - Moderator - 06-23-16, 02:13 PM

RE: CAM 200IP cabling - george123 - 06-23-16, 04:04 PM

RE: CAM 200IP cabling - Chuck - Raymarine - Moderator - 06-23-16, 04:12 PM

User(s) browsing this thread: 1 Guest(s)