Thread Closed 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Adapting cables terminated with RayNet (F) plugs to fit a SeaTalkhs socket
04-11-17, 03:21 PM (This post was last modified: 04-11-17 03:27 PM by Chuck - Raymarine - Moderator.)
Post: #1
Adapting cables terminated with RayNet (F) plugs to fit a SeaTalkhs socket
Adapting cables terminated with RayNet (F) plugs to fit a SeaTalkhs socket

The Ethernet network ports of E-Series Classic MFDs, C-Series Widescreen MFDs, and E-Series Widescreen MFDs feature SeaTalkhs (F) sockets. An A80272 RayNet (M) to SeaTalkhs (M) Adapter would be used to adapt Digital Radar Cables or other Raymarine Ethernet cables terminated with a RayNet (F) plug to be mated an Ethernet port of an E-Series Classic MFD or C/E-Series Widescreen MFD.

Note: Unlike the C/E-Series Widescreen MFDs, E-Series Classic MFDs may not be directly connected to compatible devices having an Ethernet communications interface. Instead, the E-Series Classic MFD must be interfaced to a SeaTalkhs Crossover Coupler or SeaTalkhs Network Switch, which in turn will be interfaced to the compatible device(s) having an Ethernet communications interface.

RAYFAQ#
Find all posts by this user
Thread Closed 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)