Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Analog camera input on G series
04-25-17, 03:14 AM
Post: #1
Analog camera input on G series
Hi Chuck, Can you please let me know if there is a setting on the G series display that will allow me to reverse the image of an analog camera?
Thanks so much.
Dave
Find all posts by this user
Quote this message in a reply
04-25-17, 09:25 AM
Post: #2
RE: Analog camera input on G series
Welcome to the Raymarine Forum Dave,

Unfortunately, the feature which you have inquired about is not supported. In order to display a reversed camera image within a system supporting only analog cameras, a reverse image camera (ex. E03021 CAM100 Reverse Image or E03018 CAM50 Reverse Image) must be installed. For systems featuring support for IP cameras (ex. a/c/e/eS/gS-Series MFDs and Axiom MFDs), the web page of the CAM200IP, CAM210, and CAM220 may be accessed via a PC. From the camera's web page, the camera's video image may then be reversed.
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)