Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Configuration
05-09-17, 01:23 PM
Post: #2
RE: Configuration
Welcome to the Raymarine Forum Jason,

Q1. It looks like I can interface all the ST 60s and ST6000 to the A95 with a SeaTalk NG converter.
A1. While it is recommended that ST60 instruments be adapted with a SeaTalk to SeaTalkng Converter Kit for use with a/c/e/eS/gS-Series MFDs, the same is not so for the Type 300 Autopilot Course Computer. It is recommended that the ST6000 autopilot control head be disconnected from the ST60 instruments and that it alone be interfaced to the autopilot course computer's SeaTalk port. The a95 MFD's NMEA 0183 interface would then be interfaced to the autopilot course computer's NMEA 0183 communications interface.

Q2. Can I connect both the A65 and the new HD Radar to the back of the A95's two network ports and have the radar available to both devices or do I need to buy a switch?
A2. It will not be necessary to install an Ethernet Switch as long as you intend to have the a95 MFD is switched ON whenever you desire to view radar on the a65 MFD.
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
Configuration - jalexand - 05-07-17, 07:21 PM
RE: Configuration - Chuck - Raymarine - Moderator - 05-09-17 01:23 PM
RE: Configuration - jalexand - 05-09-17, 02:02 PM
RE: Configuration - jalexand - 05-09-17, 03:03 PM
RE: Configuration - jalexand - 05-09-17, 07:38 PM
RE: Configuration - jalexand - 05-10-17, 10:59 AM
RE: Configuration - jalexand - 05-11-17, 07:00 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)