Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Temperature Readout ST-60 Speed
03-07-16, 09:34 AM
Post: #1
Temperature Readout ST-60 Speed
About mid summer last year, I started to get erroneous temperature readouts from the ST-60 Speed Log. All other functions work fine. There is a temperature presented, usually 2 degrees centigrade, but it varies a bit. Actual water temp in the high teens at least.

Is there a reset, or reboot to try. I'm assuming wiring is ok, as the speed information from impeller is transmitted fine.
Find all posts by this user
Quote this message in a reply
03-07-16, 10:58 AM (This post was last modified: 03-07-16 10:59 AM by Chuck - Raymarine - Moderator.)
Post: #2
RE: Temperature Readout ST-60 Speed
Welcome to the Raymarine Forum kpintoronto,

Please click here to view a FAQ addressing this subject.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)