The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.3.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error





Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Vesper not talking over seatalk ng
05-14-17, 06:03 PM
Post: #1
Vesper not talking over seatalk ng
Hi Chuck,

I have hooked a Vesper 8000 AIS to my system via SeaTalk ng, using a DeviceNet adapter cable, but the GPM-400/G120 does not see the unit or receive AIS data.

I have tried connecting the vesper both to the Seatalkng hub using a spur cable, and using a t connector with terminator. In both cases, I was able to get the compact keyboard to connect, but not the AIS. I also checked the system diagnostics to see what ng devices were connected, but only the keyboard is seen.

I've updated the firmware on the GPM 400 to 4.66, the firmware in the vesper, rebooted everything, but nothing seems to work.

Any suggestions would be much appreciated.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
Vesper not talking over seatalk ng - weisbergj - 05-14-17 06:03 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)