The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Autopilots v / Interfacing an RL70crc plus to AC400

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Interfacing an RL70crc plus to AC400
05-15-17, 08:55 PM
Post: #1
jac_95033@hotmail.com Offline
Junior Member
**
 		Posts: 3
Joined: Mar 2016
Reputation: 0
Interfacing an RL70crc plus to AC400
Hello,

I would like to upgrade my old S1G/ST6002 autopilot to the new AC400 Evolution corepack and p70 control head. My existing Pathfinder radar and RL70crc plus works just fine and I have no desire to upgrade those components. Can the AC 400 receive waypoints from the RL70 assuming I install the SeaTalk/SeatalkNG converter? Also, my Pathfinder recieves NEMA 0183 5hz heading data from the S1G for MARPA, is equivalent functionality available from the AC400? If so, how do I interface that?

Regards,
John C.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
Interfacing an RL70crc plus to AC400 - jac_95033@hotmail.com - 05-15-17 08:55 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication