Thread Closed 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Sharing NTSC/PAL video among MFDs
01-06-16, 10:43 AM (This post was last modified: 01-12-17 02:20 PM by Chuck - Raymarine - Moderator.)
Post: #1
Sharing NTSC/PAL video among MFDs
Sharing NTSC/PAL video among MFDs

Raymarine MFDs are not designed to transmit received NTSC/PAL video via Ethernet to other networked Raymarine MFDs. As such, the camera's video output cable will need to be interfaced to a video amplifier/splitter (FLIR part #4108996 recommended), which in turn will be interfaced to the Camera/Video 1 input BNC plug of each MFD on which thermal video is desired to be viewed.

Find all posts by this user
Thread Closed 

Forum Jump:

User(s) browsing this thread: 1 Guest(s)