Heading COG Mismatch (E125/ACU400/EV-1/P70/I70)
|
06-10-17, 02:04 PM
Post: #1
|
|||
|
|||
Heading COG Mismatch (E125/ACU400/EV-1/P70/I70)
Hello,
Most of the time, my heading and COG is accurate, however on occasion the heading will be off by 90 degrees or more on all instruments. I began to experience this problem with my old S3 and Fluxgate. I first replaced the Fluxgate and had the same issue. I then removed the S3/Fluxgate/NG converter (now all NG network with exception of NMEA AIS) and replaced with an ACU400 and EV-1, the problem still exists. Photos attached show the problem. These were approx 5 mins apart with the autopilot set to a fix heading (note autopilot did not turn the boat when heading changed so it seems the correct somewhere but displays incorrectly). Not sure what to do next, any thoughts? |
|||
« Next Oldest | Next Newest »
|
User(s) browsing this thread: 1 Guest(s)