Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Finding Transducer Model Numbers
06-22-17, 11:20 AM
Post: #1
Finding Transducer Model Numbers
Is there a way from the MFD (or some other means) to find out the model number and/or version of the transducers (wind, speed, temperature, depth) without visually inspecting the unit? Trying to avoid climbing up the mast, for example.
Find all posts by this user
Quote this message in a reply
06-22-17, 01:29 PM
Post: #2
RE: Finding Transducer Model Numbers
Welcome to the Raymarine Forum rsqunit,

Raymarine instrument depth and speed/temp transducers are manufactured with a tag affixed to transducer end of the affixed cable. This tag identifies the transducer. Wind transducers are not similarly tagged. If supplied with a photo of the wind transducer, then it may be possible to identify the model of wind transducer installed onboard.
Find all posts by this user
Quote this message in a reply
11-03-17, 12:04 AM (This post was last modified: 11-06-17 08:49 AM by Chuck - Raymarine - Moderator.)
Post: #3
RE: Finding Transducer Model Numbers
Chuck, I posted a link to the picture for my wind transducer.

https://www.evernote.com/l/ABiLoq2w0v9JN...18vgKEJRhw

Thanks!
Find all posts by this user
Quote this message in a reply
11-06-17, 08:56 AM
Post: #4
RE: Finding Transducer Model Numbers
rsqunit,

The wind transducer shown within your photos is the Product Number: E22078 Short arm (300mm) vane w/30m cable or the E22079 Long arm (600mm) vane w/50m cable. It would correspondingly be necessary to measure the wind vane's arm to determine whether it was the long arm or short arm version of this wind transducer.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)