Raymarine forum / Raymarine Forums / Autopilots v / Connecting an ST1000+ to a Garmin

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Connecting an ST1000+ to a Garmin
06-28-17, 03:35 PM
Post: #1
dsergent Offline
Junior Member
**
 		Posts: 1
Joined: Jun 2017
Reputation: 0
Connecting an ST1000+ to a Garmin
I have the ST100+ Autopilot, and a Garmin 942SX. I understand that it is possible to connect these two, but am finding the documentation challenging. The ST1000+ shows an NMEA + and - while the Garmin has Transmit and Receive.

Can I connect these directly, or do I need the E85001 adapter which is no longer available?
Find all posts by this user
Quote this message in a reply
06-29-17, 07:51 AM (This post was last modified: 06-29-17 07:53 AM by Chuck - Raymarine - Moderator.)
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: Connecting an ST1000+ to a Garmin
Welcome to the Raymarine Forum dsergent,

Please click here to view a FAQ addressing this subject. Please not that production and sales of the E85001 PC/SeaTalk/NMEA 0183 Interface Module was terminated several years ago.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication