Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] issues with axiom
06-30-17, 02:07 PM
Post: #2
RE: issues with axiom
Welcome to the Raymarine Forum 206nolan,

Q1. My new Axiom mfd wont pair with my Ipad.
A1. Please click here to view a FAQ addressing this subject.

Q2. My new Axiom mfd wont display voltage.
A2. Indeed the Axiom MFD will indeed display voltage. Please note that engine systems typically report alternator output voltage, not battery voltage. Raymarine's Axiom MFDs and a/c/e/eS/gS-Series MFDs are designed to exclusively support reporting battery voltage from a NMEA 2000 battery monitoring device (ex. Maretron DCM100, etc.) transmitting NMEA 2000 PGN 12750 (Battery Status). That said, I have had some personal experience with the Actisense EMU-1 which reports voltage from the SeaTalkng/NMEA 2000 backbone via NMEA 2000 PGN 12750 (Battery Status). Raymarine's a/c/e/eS/gS-Series MFDs are designed to report supply voltage within the MFD's diagnostic features (H0ME->SET-UP->MAINTENANCE->SELECT DEVICE->Select the MFD of interest from the displayed Devices list). A feature request has been submitted to consider that Axiom MFDs, a/c/e/eS/gS-Series MFDs, and i70 MFIDs report supply voltage within the Battery 1 Voltage Data item when PGN 12750 is not present on the SeaTalkng / NMEA 2000 backbone.

Please click here more information concerning product and feature suggestions..
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA] issues with axiom - 206nolan - 06-30-17, 11:14 AM
RE: issues with axiom - Chuck - Raymarine - Moderator - 06-30-17 02:07 PM
RE: issues with axiom - Wriggin - 07-28-17, 08:17 AM
RE: issues with axiom - 206nolan - 03-06-18, 11:50 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)