Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] issues with axiom
03-07-18, 11:45 AM (This post was last modified: 03-07-18 12:09 PM by Chuck - Raymarine - Moderator.)
Post: #6
RE: [CA] issues with axiom
206nolan,

Q1. I'm pretty sure that the last update is what fixed it and now is showing battery voltage through the nmea2000 this is what other devices do
A1. Your statement is incorrect. As indicated within my initial response, the MFD's Battery Voltage data items are designed to be populated by devices transmitting NMEA 2000 PGN 12750 (Battery Status), such as Maretron's DCM100. However, as indicated within the Software History table of the LightHouse 3 software update web page or Axiom and Axiom Pro MFDs, Raymarine has added a new data item, Supply Voltage, within the v3.3.170 software update which may be used to monitor the voltage level supplied to the MFD. Understand that voltage level at a battery may differ from voltage level sensed at a powered device due to resistances with the circuit.

Q2. also btw unit does pair with Ipad now
A2. We're glad to learn of the success reported.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA] issues with axiom - 206nolan - 06-30-17, 11:14 AM
RE: issues with axiom - Wriggin - 07-28-17, 08:17 AM
RE: issues with axiom - 206nolan - 03-06-18, 11:50 PM
RE: [CA] issues with axiom - Chuck - Raymarine - Moderator - 03-07-18 11:45 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)