Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
RL70C not communicating with RC631
06-09-16, 05:12 PM (This post was last modified: 06-10-16 10:39 AM by Chuck - Raymarine - Moderator.)
Post: #18
RE: RL70C not communicating with RC631
OK I did figure out the power problem I had a blown fuse in the 400 G. So now when i disconnect the red lead from the ST1-STNG converter to the 400 G I still get power to the ST6001 control head.

Now my question is, the control head comes on alright and when I push the autopilot control on the mfd the autopilot engages. However, I don't seem to be able to control the autopilot with the ST6001 control head. Pushing the +10 or -10 does nothing. Am i assuming correctly that the ST6001 should be fully functional and be able to control the autopilot same as when I had my pathfinder MFD's
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: RL70C not communicating with RC631 - dkritter - 06-09-16 05:12 PM

Forum Jump:


User(s) browsing this thread: 2 Guest(s)