Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
DSM300 and dual transducers
09-11-17, 01:09 PM (This post was last modified: 09-12-17 08:33 AM by Chuck - Raymarine - Moderator.)
Post: #3
RE: DSM300 and dual transducers
I have now positively identified my 2 transducers: Airmar P66 and Airmar P39. I cannot locate any DSM300 module, although the stack of manuals I got from the PO has one. So I'm guessing both of the Airmars are cabled directly into the E80 Classic. Since the CF reader on the E80 is kaput, I'm replacing with Axiom 9. Is this an instance where I can use a "Y" cable adaptor? The P39 is plugged into the NMEA port on the back of the E80, and the P66 is plugged into the Seatalk port, and something else (GPS?) is networked into the SeatalkHS (Ethernet) port.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: DSM300 and dual transducers - WarrenMudd - 09-11-17 01:09 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)