[CA11] Bennett NMEA1 (N2K) trim tabs & the AXIOM 9rv

Thread Rating:

0 Vote(s) - 0 Average
1
2
3
4
5

Threaded Mode | Linear Mode

[CA] [CA11] Bennett NMEA1 (N2K) trim tabs & the AXIOM 9rv

07-26-17, 02:35 PM (This post was last modified: 10-01-18 08:28 PM by Chuck - Raymarine - Moderator.)

Post: #2

Chuck - Raymarine - Moderator Offline

Administrator

Posts: 14,319
Joined: Oct 2014
Reputation: 43

RE: [CA11] Bennett NMEA1 (N2K) trim tabs & the AXIOM 9rv

Welcome to the Raymarine Forum DSMINVA,

Unfortunately, like the a/c/e/eS/gS-Series MFDs which preceded them, the Axiom MFDs do not support calibration of third party NMEA 2000 sensors. Third party calibration devices, such as the BennettÂ® Trim Tab Adaptor With NMEA 2000 from Offshore Dynamics are available for such purposes. Such calibration devices are designed to sense the analog output of each tab when in the full up and full down position and then calibrate these analog values to support the full deflection range of the port and starboard trim tab elements of NMEA 2000 PGN 130576 Small Craft Status and are commonly used by OEM boat builders employing BennettÂ® trim tabs.