Raymarine forum / Raymarine Forums / Product and Feature Suggestions v / [CA] [CA11] Bennett NMEA1 (N2K) trim tabs & the AXIOM 9rv

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Bennett NMEA1 (N2K) trim tabs & the AXIOM 9rv
10-02-18, 10:10 AM (This post was last modified: 10-02-18 10:10 AM by Chuck - Raymarine - Moderator.)
Post: #8
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] Bennett NMEA1 (N2K) trim tabs & the AXIOM 9rv
Matt,

Per our conversation, should the Bennett N2k kit transmit the NMEA 2000 PGN 130576 Small Craft Status referenced within my earlier response, then the MFD will populate the Trim Tab data item displayed within the LightHouse 3 Dashboard's Engines Data Panel. Also per that discussion, we typically recommend use of a NMEA 2000 analyzer (ex. Actisense NGT-1 w/NMEA Reader software, etc.) to verify presence of specific PGNs on the SeaTalkng / NMEA 2000 backbone as well as to verify the content within these PGNs.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] Bennett NMEA1 (N2K) trim tabs & the AXIOM 9rv - Chuck - Raymarine - Moderator - 10-02-18 10:10 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication