Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
ST800/P120 (Plastic) vs. (Bronze)
07-27-17, 09:54 AM
Post: #1
ST800/P120 (Plastic) vs. (Bronze)
Chuck,

The thermister in my ST800/P120 (Bronze) transducer that's connected to a CP370 has failed (currently reading ~ 104 degrees). I do NOT need to replace the thru-hull, only the transducer.

My question, will the transducer from the Plastic (E66071) fit the Bronze (E66072) thru hull? There's a significant cost savings if I go with the Plastic.

Feature suggestion - if they ARE interchangeable, please offer just the transducer at a correspondingly lower cost.

Thanks in advance,

Joe
Find all posts by this user
Quote this message in a reply
07-27-17, 11:11 AM (This post was last modified: 07-28-17 09:31 AM by Chuck - Raymarine - Moderator.)
Post: #2
RE: ST800/P120 (Plastic) vs. (Bronze)
Welcome to the Raymarine Forum Joe,

The Speed/Temp insert is indeed the same between the E66071 ST800 / P120 (Plastic) Speed/Temp Fishfinder Transducer and the E66071 ST800 / P120 (Bronze) Speed/Temp Fishfinder Transducer. Please click here to view a FAQ addressing where one may obtain transducer parts.
Find all posts by this user
Quote this message in a reply
07-28-17, 09:50 AM
Post: #3
RE: ST800/P120 (Plastic) vs. (Bronze)
Thanks Chuck. I'll keep that FAQ handy.

Joe
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)