Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
E Classic series Seatalk 2 port
03-14-16, 09:14 AM
Post: #1
E Classic series Seatalk 2 port
Hello,

We have a costumer with an E80 Multifunction display and we need to know if the seatalk 2 port is working, where can we find the pinout of this port? I found the NMEA 0183 and Seatalk pinout in the instalation manual, but Seatalk 2 is missed!

A few more cuestions:

Is Seatalk 2 fully compatible with Seatalk NG?

Is necessary to power the Seatalk 2 port from the network in order it to work?

Can GPS, autopilot, sounder and anemometer be connected to de E80 throught the Seatalk 2 port?

Thanks in advance,

Martin Sivolella
Aeromarine S.A.
Find all posts by this user
Quote this message in a reply
03-14-16, 03:17 PM (This post was last modified: 03-15-16 09:43 AM by Chuck - Raymarine - Moderator.)
Post: #2
RE: E Classic series Seatalk 2 port
Welcome to the Raymarine Forum Martin,

Please see the image below detailing the the E-Series Classic MFD's SeaTalk2/NMEA 2000 plug.

[Image: attachment.php?aid=93]

When operating with the latest available Raymarine product software updates, E-Series Classic MFDs feature SeaTalkng/NMEA2000 support via the MFD's SeaTalk2/NMEA 2000 socket. Should one have a system featuring a ST290 DPU, then it is recommended that the DPU be interface to the system as a SeaTalk device via a SeaTalk to SeaTalkng Converter. With the exception of AIS transceivers, the E-Series Classic MFD will support operation via SeaTalkng with other Raymarine products featuring a SeaTalkng communications interface. With respect to third party products other than engine systems, NMEA 2000 communications with E-Series Classic MFDs may occur for third party NMEA 2000 devices for which Raymarine offers a corresponding product.


Attached File(s) Thumbnail(s)
   
Find all posts by this user
Quote this message in a reply
03-15-16, 02:57 PM
Post: #3
RE: E Classic series Seatalk 2 port
Thanks for your help Chuck.

Regards,

Martin
Find all posts by this user
Quote this message in a reply
03-15-16, 03:59 PM
Post: #4
RE: E Classic series Seatalk 2 port
You're welcome.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)