Connecting T-120/T-112 to T122 & ST6001+/S2G

Thread Rating:

0 Vote(s) - 0 Average
1
2
3
4
5

Threaded Mode | Linear Mode

Connecting T-120/T-112 to T122 & ST6001+/S2G

08-21-17, 01:37 PM

Post: #2

Chuck - Raymarine - Moderator Offline

Administrator

Posts: 14,319
Joined: Oct 2014
Reputation: 43

RE: Connecting T-120/T-112 to T122 & ST6001+/S2G

Wally,

Using an appropriate length of marine grade twisted pair signal cable, the NMEA 0183 Output + and - terminals of the TackTick T122 will be connected to the NMEA 0183 Input + and - terminals respectively.

« Next Oldest | Next Newest »

Messages In This Thread

Connecting T-120/T-112 to T122 & ST6001+/S2G - wally400 - 08-21-17, 12:56 PM

RE: Connecting T-120/T-112 to T122 & ST6001+/S2G - Chuck - Raymarine - Moderator - 08-21-17 01:37 PM

RE: Connecting T-120/T-112 to T122 & ST6001+/S2G - wally400 - 08-21-17, 03:59 PM

RE: Connecting T-120/T-112 to T122 & ST6001+/S2G - Chuck - Raymarine - Moderator - 08-22-17, 08:33 AM

RE: Connecting T-120/T-112 to T122 & ST6001+/S2G - wally400 - 08-22-17, 09:41 AM

RE: Connecting T-120/T-112 to T122 & ST6001+/S2G - Chuck - Raymarine - Moderator - 08-22-17, 09:48 AM

User(s) browsing this thread: 1 Guest(s)