The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Autopilots v / Fluxgate Compass/Airmar H2183

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Fluxgate Compass/Airmar H2183
08-21-17, 03:57 PM
Post: #1
Donzii150 Offline
Junior Member
**
 		Posts: 10
Joined: Aug 2017
Reputation: 0
Fluxgate Compass/Airmar H2183
E80 classic, X10, St70, Digital Radar, DSM 300.

I've had issues with my autopilot breaking lock no matter where I position my fluxgate compass and or aligning my compass several times with around 5 degrees of deviation. I am not confident in my system although it does work OK sometimes but I have to keep an eye on it. Also, I have ohm'd out my compass and it checks out with procedures posted on forum. I have done all required updates as well. My question: Does the Raymarine fluxgate compass cycle at 1Hertz and would it be beneficial to replace it with an Airmar H2183 heading sensor at 10Hertz? I'm wondering if it gets saturated with all the equipment that I'm running and thus causing autopilot to malfunction. Thx in advance. Todd
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
Fluxgate Compass/Airmar H2183 - Donzii150 - 08-21-17 03:57 PM

Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication